Blessed are the Geeks, for they shall internet the earth

Top 10 things to know about network administration
Tom Lancaster

If you're just getting started in the networking field, you've got a lot to learn, and with the rate of changes in networking technology, you can expect to always have a lot to learn, but here are ten essential topics that you should concentrate on (and if you are not just getting started, here are some things to review):


  1. The OSI model: Memorize it. It's almost a cliché, but understanding it is critical.
  2. TCP/IP concepts: Learn to think in binary and get a firm grasp on bitmasks, subnetting, gateways (like the "default gateway") and how addresses are constructed (the network portion, the host portion, etc).
  3. Stacks: Read about how the network stack is implemented on hosts. Get a good feel for what each component (the NIC, firmware, device drivers, the OS, etc) is responsible for. Once you understand this, troubleshooting is easy.
  4. Layer 2: Learn how switches operate and how they're different from hubs and routers. Understand bridging, and get a general idea of what Spanning Tree Protocol does. Learn the difference between a collision domain and a broadcast domain, and then study VLANs.
  5. Routing: Learn a routing protocol. Start with RIP, because it's easy. You don't need to be a guru, just get a general idea about how routers can exchange information about the network.
  6. Services: Understand the role of DNS and DHCP and WINS and know their alternatives, like the host and lmhost files and static addressing.
  7. Find yourself some good networking reference material. is a great for deciphering arcane acronyms.
  8. Security: Read a little about how firewalls operate and other security technologies like VPNs. Understand the difference between authentication, authorization and accounting.
  9. Output: Learn how to get status and information out of your networking devices. A good place to start is with the "show" commands (which will be featured in next week's tip).
  10. Finally, do a walkthrough: follow data as it goes from one application to another. How does it get from the application, to being segmented, packetized, framed, and routed? How does your computer know what IP address to send the packet to? (DNS) How does it know what MAC address to send it to? (ARP) How does it know how big to make the frame? (MTU) How does a switch know which port to forward your packet out on? (FDB) How does a router know which interface to use? (routing table) If you can answer these questions, you're well on your way to being competent and productive. is the largest and most active online community dedicated to the enterprise network.  Over 300,000 IT professionals rely on for industry news, technical tips and valuable best practices on routing, switching, network security, network/systems management, convergence/VoIP and wireless LANs, so they can keep their networks up to date and cope with constant change. 

Whether you are looking for advice on implementing a new technology or seeking new cost-saving strategies to improve the performance of your current network, is an online helpdesk for IT managers and administrators.  We provide unbiased news, a library of how-to tips, informative learning guides, expert and vendor Webcasts and white papers – all in an effort to arm you with the tools and tactics you need to do your job successfully and make the right IT purchasing decisions. Register for FREE today...,291003,sid7,00.html 






E-mail your comments to
All rights reserved

Disclaimer: The Opinions shared on are contributed by its readers and does not necessarily express the opinion of the creators of this publication.